Thursday, October 10, 2013

Impromptu Encinitas lifestyle shoot with Sanders Anderson

What do you do when you have an hour to kill before you have to go catch a train? Do a photo shoot of course!

My friend Sanders was in town from Portland for a couple of days. We had an awesome visit that included a good ride and some excellent biz talk. We were hanging out waiting to take him to the station to catch his train back up north and Sanders mentioned his budding modeling career. Nothing crazy, but he was interested in doing some modeling and had potential to get gigs. He had done a few outdoor lifestyle shoots but needed some more city lifestyle for his portfolio. We agreed that we had some time (an hour) and we should run downtown Encinitas to crank off some shots. It was simple, quick and I think we got some decent shots in the short amount of time we had.

If he has a look that can work for your production, Sanders lives and works in Portland, OR. His company is BETRUE Design. www.betruedesign.com There's a video about him and his business at the end of this post.














 

Tuesday, September 10, 2013

Patagonia - The Whole Enchilada

This afternoon, our dog Brodie started barking and I realized that the mailman must be dropping off the mail. I went out to calm Brodie down and grab our mail. Expecting chintzy coupon mailers and water bills, I was surprised to reach into the box to find a big, thick, heavy magazine.  After filing through all of the other crap like chintzy coupon mailers, and a couple of bills, I saw this.



Back in the day, I used to shoot photography for Patagonia. There was a certain excitement to getting a catalog in the mail because it meant I had photos in it, one of my friends had photos in it or another one our friends were featured in it. When a catalog came in the mail it went like this: Run through the photos cover to cover, taking particular attention to the names that sit opposite the photo in the credit line. 

Over the years, I fell out of the outdoor shooting world so the Patagonia catalogs don't hold quite as much importance anymore. Usually, my viewing session consists of flipping through it at the kitchen counter with the same tepid interest I have with any of the myriad of catalogs that land in our mailbox on a daily basis. The catalogs got smaller, the pare got thinner. The imagery began to feel a bit a little to staged in a lifestyle sense.

But today was different. Immediately, I noticed that the catalog was thicker and it had a flat binding on it. The paper was stiff and heavy. It felt like a journal, like a Surfer's Journal with distinct quality. 


After flipping through the first few pages, I realized that this book was something unique. Instead of the same hyper-sharp photos of their ambassador athletes doing the same cool things that they do in their charmed lives of trotting around the globe...there were gritty, blurry, full bleed photos of the original gangsters goofing off with Fitz Roy in the background, the random butt shot that can only be created at a long, cold arduous belay, a stunning shot of a skier dropping an insane line in perfect light. 






The kind of photos that make you want to take time to look at them, ponder the possibilities of what's going on and pull you back to a time when living in the back of a van was a viable way of life. 

Before I knew it, I had gravitated over to my big comfy chair, sat down and started again from the beginning. Instead of flipping hastily through the catalog, I found myself soaking in the imagery shown in extra large size like it always had been back in the day. To round out this visual history lesson, Patagonia then tells their story, like its the foreword of a book.


Now that they told you who they are, they don't thrust you into a bunch of things that you think you need to look cool. They open with one of their signature stories about the core essence of why we love to play. Often it is a story of great suffering and regret which turns to reflection and enlightenment. Sometimes it is about the quest for achievement that gets derailed by mother nature. Its a story that anyone who has kissed death or been exhausted beyond measure knows all too well. Half of the people who read the stories know them like they've lived them and the other half dream of ever having the opportunity to be thrown into those situations.


Once I finally got to the product pages, they were bigger, brighter, enhanced with more negative space to give each garment its own pedestal to stand upon. Instead of a small tab that say Women's, Men's, Travel, each section was presented like it was its own chapter complimented with the  powerful, realistic imagery to re-instill that this these products are designed to work 3500' up a frozen wall, so they'll work just fine on the sunny slopes of Vail.


Halfway through, Patagonia did what they have done forever, and told us another story of why we need to give a shit about the world around us. Even though this is a conduit of consumerism, they still display a social responsibility that they have embraced for 40 years as a company. Its thoughtful, its stimulating and reminds us that there are still a lot of problems that need to be dealt with. Many of these problems aren't necessarily out of our reach and fundamental changes in our own behavior can make differences.





As I closed the book with that historic picture of Chouinard's pins gracing the back cover. It felt nostalgic to hold a catalog that was reminiscent to what made the "Patagonia Catalog" such an iconic piece of outdoor culture for the last several decades. 

I don't think Patagonia ever got away from their true style of making a good catalog. All of the elements described have always been there. They just got minimized by a recession, printing costs and market trends. It's a refreshing to see Patagonia come back to its roots of creating a picture book that deserves to be kept around a little longer and doesn't get discarded within hours of hitting the mailbox. It speaks to their culture, their philosophy and their product.

Thanks Patagonia for bringing us the Whole Enchilada.









Thursday, July 25, 2013

SDGBC Green Assistance Program video

Recently, I worked with the San Diego Green Building Council to produce a video showcasing their Green Assistance Program. I could attempt to describe the program in words but Doug Kot from the SDGBC does such a better job.

The Green Assistance Program was developed to aid local non-profits and community centers that desire to green their buildings.  The premise of this program is to rally the expertise in the green building community in service to these other institutions that support the community and provide human services in our region.

The vision we have for the future is that our buildings and communities will regenerate and sustain the health and vitality of all life within a generation. Our community are the experts in green buildings.  If we can help other non-profits lighten the burden of designing, constructing, or operating their buildings, then they can better focus on their mission--while we focus on ours: to inspire, educate and collaborate within our community to transform our built environment toward true sustainability.  This is about social equity, economic return and environmental responsibility. 

The SDGBC is grateful to the Sempra Energy Foundation for their gracious support in the launch of this program in 2010. Ongoing support for GAP has been provided by San Diego Gas & Electric, USGBC National and DPR Construction. We are also grateful to our partner institutions that have allowed us access to their facility and to LEEDUser for technical support in pursuing LEED Certification.


...or you can watch our video to get a better idea of what a great program the GAP is.




Tuesday, June 18, 2013

SDGBC Green Assistance Program with World Beat Center

Recently, I've been working with the San Diego Green Building Council documenting their Green Assistance Program. It is a program that allows people who are trying to achieve LEED accreditation get real experience on LEED projects. The program works with non profits to assist them with making their buildings more energy efficient, healthier and more pleasant to work in.

The SDGBC has been collaborating with Balboa Park to improve several of their buildings in the park. One of the first projects of the Green Assistance Program was the World Beat Center. Here is a video that we produced describing the LEED improvements made on the WBC as well as the benefits for both the staff of the WBC and LEED professional that worked on the project.





Thursday, May 23, 2013

Kontron edit job

Here's an edit job that I did a little while back. It was my first project solely as an editor. All footage was stock. Click the blue tabs to view the videos.

The client is Kontron and makes embedded computing technology for military and defense applications.


http://us.kontron.com/smartcity/




Tuesday, May 7, 2013

Good film and video resources

Learning the world of motion has been an exciting yet daunting experience. Fortunately, there are some amazing resources out there for information. The internet has really changed the way we can learn and develop our skills. In my free time (or when I want to procrastinate on doing tedious work) I visit a few sites to stay on top of what is happening in the video and film world.

Vincent Laforet - Father of DSLR video with 5D MKII. Originally, a photographer, Vincent has moved into the film making world. His blog provides a lot of info on gear and technique. His reel is a decent source of inspiration.

nofilmschool.com - A blog hosted by Ryan Koo with a constant stream of the latest information in the video world. Also check out his new short movie, AMATEUR

hurlbutvisuals.com - An awesome cinematographer who is very passionate about sharing his knowledge. Its amazing how this guy has time to crank out all of the work he does and then provide such in-depth information on his blog. Its a must read.

fcp.co - A site dedicated to all things FCPX

Vimeo - Most people already know about Vimeo and that it is a higher grade YouTube. I usually hop on and check out the staff picks while I drink my coffee in the morning. Its a good source for inspiration and to see how much talent there is in the world. There is also a pretty decent music collection for download, both creative commons and low cost options for film makers.

Shot On What? - This is a techie site that provides all the info about what movies and television shows were shot with.

IMDB - This is one of my favorite sites. It is a comprehensive database of movies and television shows. IMDB provides information about the cast, seasons, filming locations, goofs, etc. Once you start watching movies by your side, you'll become an addict!

Roger Deakins - Roger is an accomplished ASC and BSC cinematographer. Some of his credits include Skyfall, No Country for Old Men, and The Big Lebowski. This is another advanced class site that provides a wealth of info. If Roger doesn't cover it, one of the hundreds of posters on the forums will provide insight to your questions.

The Black and Blue - Evan Luzi has created a site that has lots of info about the day-to-day happenings on set. He is a first assistant and aims to provide information to aid others who want to be assistants or camera operators. He provides a good perspective from somebody within the crew.

Cinema 5D - A site originally dedicated to the DSLR side of film making but has a ton of info about all types of cameras and tools.

Color Grading Central - This is a site dedicated to........Wait for it...... color grading! Denver Riddle provides a bunch of FREE video tutorials on the fundamentals of color grading both in FCPX and DaVinci Resolve. If you need more in depth training, he provides paid membership to advanced content.

There are a ton more resources out there and I could list a hundred more but that is where I'll stop.  Next time, I'll provide a list of my current sources of inspiration.


Thursday, April 25, 2013

Architectural Photographers List

Recently, I was invited to list my work on a new listing called Architectural Photographers List. It is a site developed by Rob Haggart and the APhotoEditor team. Its not the most creative, quirky name but then again, neither are architectural photographers. Nonetheless, it another good resource for finding architectural photographers.

Here is a link to the launch post from APhotoEditor's blog.

http://www.aphotoeditor.com/2013/03/12/calling-all-architectural-photographers/

http://architectphotographers.com/

BTW, Rob runs a website development company called APhotoFolio. Their websites have become industry standard. They are constantly evolving with technology to make the best websites for photographers. Prices are very reasonable and customer service is spot on!

Thanks Rob and keep up the great work!

Tuesday, April 23, 2013

New website for Randall Lamb and Associates

Late last year, I photographed the staff and principals of Randall Lamb and Associates. They are an engineering firm based in San Diego and San Francisco, CA. All portraits were shot at their offices. We photographed the principals on both a white seamless backdrop and in various locations around the office.

Their new website launched recently. It was designed by David Lecours. He did a great job of giving their brand a fresh new image.


Thursday, April 18, 2013

Consistent Tee video

A solar install client of mine, Everyday Energy, also runs a golf tee company called Consistent Tee. A couple of weeks ago, they called me to shoot a video for them. It was essentially a "challenge" format where golfers would hit balls with their tees and then hit with the Consistent Tee and compare results. It definitely was a blitz kind of shoot that was fun.

They wanted a quick, grass roots feel that wasn't too polished. This is what I came up with.


I'd like to thank Kenny Farrington for coming out and helping on this project. 

Music credit: "Disco High" by UltraCat (http://www.ultracatmusic.com/)


Monday, April 15, 2013

Studio Frank christmas card

As tax season is winding down today, I took some time to clean up the old paperwork and get organized for many new opportunities on the horizon. As I was cleaning, I came across this cool little Christmas card that I received from my friends over at Studio Frank around the holidays.

While its not still the holiday season, the message still rings true.


Sunday, April 14, 2013

Luxe magazine Colorado Winter 2012

This is the feature spread of a project we photographed in Durango last year. It was really beautiful home located on the banks of the Animas river. Here's a list of a few of the people involved in the construction and design of the home and landscaping.

Contractor: Madera Construction
Architect: Acock and Associates
Landscape design: Eco-Logical Resources
Interior design: Interiorworks and Jordan Design




Luxe Colorado Winter 2013

Thursday, March 21, 2013

Multi-day time lapse of a solar installation - The final product!

Finally! Here is the final product of the time lapse.

 

You can also watch it on Vimeo. Click this link: https://vimeo.com/62178905


In my previous posts I described the set up and planning for one main camera. In the video, there are two other views from other cameras that were shooting at the same time. One camera was clamped to a pipe and captured the installation of the inverter boxes on the side of the building. It was shooting a time lapse at 1 second intervals. The footage was then sped up in FCP. The third camera was a Canon G12 set on a tripod. It wasn't shooting stills but rather video. I then sped up the footage by 20x, giving it a timelapse effect.

I would like to thank Trina Solar for bringing me on board to do this project. Also, I want to thank all of the staff of the American Lung Association in California for all of their warm generosity. They really rocked! Last but not least, a ton of gratitude goes out to the crew at Everyday Energy. Everyone from their management to the guys working on the roof were super helpful and communicative about what was going on with schedule and logistics. They helped me out throughout the project and were extremely nice the whole time!


Wednesday, March 20, 2013

Multi-day time lapse of a solar installation - The support rig



Today, I am going to describe the stand and enclosure that used for my time lapse set up. One of the big challenges I faced, was that I needed to mount a camera up high above the roof. The solar array is fairly flat and a high perspective gives the best unobstructed view for the camera. Unfortunately, there was nothing to mount the camera to that got it high enough. After exploring different options like tripods, ladders and light stands, a C-stand proved to be the best solution.
  • It could be extended to a height that I needed, 10-15'
  • It is heavy duty enough to hold the camera and enclosure
  • It could be easily sand bagged 







Next, the camera needed a protective enclosure. The camera was going to stay on the roof for an extended period of time and need protection from rain, bird poop, and other elements. Also, an enclosure on top of a stand wouldn't look as enticing to a thief as a bare camera and lens. 


I used a hard plastic case similar to a Pelican case. It was actually kind of tricky to find a case that was the right dimensions to fit the camera into.  I found the Seahorse SE-540 Case at Fuerte Cases. This case was just deep enough to house the 1Ds and 24mm lens with a couple filters stacked on it. It also had enough room to store the AC power inverter and intervalometer next to the camera.

The first step to building the enclosure was to create a window for the camera to shoot through. I cut a square hole that was approx. 6"x6" in the case opposite the lid opening. Then, a piece of 1/4" glass was epoxied into the inside of the opening.









 











Next, I drilled holes in the bottom of the case to run a 1/4" 20 screw through for mounting the camera and to run the power cord out the bottom of the case. I drilled a few extra holes in the bottom for ventilation so if the case got hot, it could release the hot air and not become an oven for the camera.

The enclosure was mounted to the C stand with a small ball head.The quick release of the ball head was threaded with 1 1/2" screw that ran through the bottom of the case. The camera mounted onto the 1 1/2" screw.

The stand was raised to its maximum height which was about 13'. Three sand bags weighted down the stand base. While the C stand is fairly heavy duty, the camera still swayed in the wind when everything was fully extended. This required me to tie on some guy lines to the top of the stand right below the camera. By using three lines, spaced equidistantly and tied off with weight bags, the camera could be stabilized in windy conditions. It wasn't perfect, but it did make for a much more solid configuration.





In the next post, I'll talk about what worked as planned and what failed and needed improving.

Wednesday, March 6, 2013

Multi-day time lapse of a solar installation - The camera

This a continuation of my last blog post illustrating my set up and process for a multi-day time lapse of a solar installation. In my first post, I went over the math to calculate how many shots were needed and what the interval duration of those shots needed to be. Today, I'll describe the camera set up that was used and why used what I used.

The Camera
My first thought when choosing a camera was a GoPro camera. It is small, lightweight, waterproof and wide angle. After researching it, I discovered that the Go Pro cameras only allow for a maximum interval duration of 1 second. This project needed between 30 seconds - 2 minutes depending on the full duration of the project. Unfortunately, the Go Pro was out.

Another consideration was power supply for the camera. If it needed to be on for multiple days battery life could be an issue. I didn't want the battery to die and not know it, thus stop capturing images. My Canon 1Ds MKII has an AC adapter that allows it to be plugged in. I'm sure AC adapters are available for a lot of cameras, but I already had one available for my 1Ds so that was a big decider for camera choice. With the AC adapter, the camera could be plugged in and run perpetually for as long it had capacity to record images.

The array was to be about 150'x50', so a wide angle was needed. Originally, I chose a 24mm but changed it to 20mm at the last minute. I didn't know exactly how big the array would be and where the exact positioning of the panels would be, so I played it safe with a wider lens. The resolution of the camera totally allowed for some cropping if the image is too wide.

I'm using a knock off Chinese made intervalometer to control the time lapse. It cost me $20 on E-bay and still works pretty good. Sorry Canon, this is one where I just couldn't justify the $150 price tag for your product.

The weather is predicted to be bright and sunny. Now it's time to go back in time and remember those cool little exposure guides on the inside of Kodak film boxes. It told you that in order to expose the 100 ISO film properly on a bright and sunny day, the exposure needed to be set at 1/125 sec at f/16. Based on my intervalmeter's limitations, the fastest shutter speed I can use is 1 second. 1 second is 7 stops brighter than 1/125 sec. For a 1 second shutter speed, that would require an aperture of f/180. Most lenses have a minimum aperture of f/22 or f/32 so it is necessary to cut down the amount of light entering the lens.

This requires a neutral density filter. which is a neutral grey filter that simply cuts down the amount of light entering the camera. For this project, I used an ND 8 which cuts the light by approx 3 stops. I also stacked a polarizing filter on top of the ND to further reduce the light by 1 1/2 stops. The polarizing filter also enhanced the saturation of the colors and reduced the glare on the reflective solar panels.

The the final exposure will be f/22 at 1/2 sec. Even this will be a little over exposed but the RAW files can be pulled down in Lightroom to achieve a good exposure.

My next post will describe the housing that protects the camera from the elements while it sits on the roof for a few days.
















Tuesday, February 5, 2013

Multi-day time lapse of a solar installation - Basic math

Over the next couple of weeks, I'm going to post a series of essays illustrating the process of capturing a long term time lapse. This project presented some issues that required a little thought in setting up my system. I thought this would be a good opportunity to share some of the challenges that were encountered and solutions to overcome them. There are a few unknowns regarding the project(as always) and I'm going to share my learning process to the solve those issues too.

A while back, I was contacted by a large solar installer and asked to shoot a time lapse of an solar array installation. The installation would be on the San Diego office of the American Lung Association. After a couple of bumps and derailments, the solar installation is finally commencing next week.

As I mentioned earlier, there were several issues that caused me to scratch my head. Here are some of the considerations to be addressed:
  • The installation will take between 3-7 days
  • The final time lapse video needs to be 1 minute
  • Need to power a camera and intervalometer for multiple days of shooting
  • The installation is on a flat roof with no locations that a camera can be mounted to in order to look down on the roof to capture the process
  • Camera needs to be protected from potential weather and elements
  • Camera(s) can't interfere with the workers doing the install
The basic math
There are a couple ways to determine how long a time lapse needs to be shot and how many shots per minute need to be shot. If the priority is creating a certain amount of movement in clouds or the sun, one will choose the amount of shots per minute to get the desired effect. Visit Timescapes to get a better understanding of all the elements you should consider.

If the final time lapse needs be a specific amount of time, then a little math needs to calculated to determine how many shots need to be shot. For my scenario here, I have a target time of 60 seconds for my final time lapse video. My final output video will be 24 frames per second, since the time lapse footage may accompany interview or b-roll footage for other videos. Now multiply 24(fps)x60(seconds of final video) and you get 1440 shots to fill a 60 second time lapse.

Now comes the trickier part. In a perfect world, the solar installer would give me a specific amount of time that the installation will take to complete. In reality, he told me this morning that it will take between 3-7 days depending on complications and other factors. My challenge is distributing those 1440 shots in a 3-7 day timeline.

For sake of simplicity, let's assume that the project will take five days. Each work day will be 7am to 5pm or 10 hours. 10 hours a day multiplied by 5 days equals 50 hours of total capture time. We then divide 1440(number of shots) by 50 hours and we get the total of shots per hour of 28.8 or 29. If I shoot one shot every 2 minutes, it will get me very close to making a 60 second time lapse.

As I mentioned before, the actual project time is fairly unknown right now. How I am going to deal with that issue will be addressed in a another post. Stay tuned!